Panduit Atlona AT-HDR-SW-52ED, Руководство пользователя

Страница: 65 / 81

AT-HDR-SW-52ED 65
Configuration and Management Interfaces
RS-232/IP commands
Manufacturer
Click this drop-down list to select the manufacturer of the sink device. If the product manufacturer for the device is
not listed, select Generic .
Generic Eiki Optoma Sharp
Acer Epson Panasonic Sony
Barco Hitachi Pjlink Toshiba
Benq Infocus Planar Viewsonic
Canon Lg Qomo Vivtek
Casio Nec Samsung
Products
Click this drop-down list to select the product, based on the value set in the Manufacturer drop-down list.
Model
Click this drop-down list to select the model, based on the value set in the Products drop-down list.
Repeat Command > Status
Click this toggle switch to enable or disable the repeat command feature. Some devices may require that the
command be sent multiple times before an acknowledge message is received from the display. Refer to the User
Manual for the display device for more information. The default setting is
ENABLED
.
Repeat Command > Times
If the Status toggle switch is set to ENABLED , then this drop-down list will be available. Click this drop-down list to
select the number of times to send the command. Available values are 2 , 3 , and 4 .
ON/OFF//Volume-/Mute/Mute on/Mute off
These fields are used to enter the required commands for each operation, if the Manufacturer drop-down list is set
to
Generic
. Both Hexadecimal and ASCII formats are permitted. If a manufacturer, product, and model is selected
from the above drop-down lists, then these fields will be filled in, automatically, based on the product that was
selected.
Send
Click these buttons to send the command string to the device.
Save
Click this button to commit changes.
Revert
Click this button to reset all fields and set the Manufacturer drop-down list to Generic .