AT-ANC-108D
50
2. Click the
KEY 15
button.
3. Click the
Edit
button.
Device Operation
Configuring Extension Macros
1. Click the
Extension Macro
tab.
Up to this point, the macro is in place for toggling the display power ON or OFF. The next step is to configure the
LED indicators on the front panel of the AT-ANC-108D. Extension Macros are required in order for the buttons on the
AT-ANC-108D to display the current state of a device.
NOTE:
The Extension Macro tab functions differently than the Macro Settings tab. When setting up
button behavior for the AT-ANC-108D, it is not necessary to assign a macro to the same button that
is used to perform a function. For instance, in the examples on the previous page, the PWR macro
was assigned to Button 1. Here, we will use Button 15 and Button 16 to control the LED indcator of
Button 1.