manualshive.com logo in svg

Panduit Atlona AT-ANC-180D, Руководство пользователя, Страница: 24 / 65

Поделиться
Скачать
Panduit Atlona AT-ANC-180D Скачать руководство пользователя страница 24

AT-ANC-108D

24

LAN

AT-ANC-108D

DC 5V

-   +

IP Configuration

Resetting to Factory Defaults

Resetting the AT-ANC-108D requires that the wallplate be removed.  Refer to 

Wallplate Installation (page 13)

 for 

more information.  If no DHCP server is found after a factory-reset, then AT-ANC-108D will be assigned the default 

static IP address of 

192.168.1.50

.  The subnet mask will be: 

255.255.255.0

 and the gateway will be 

192.168.1.254

.

1.  Remove the wallplate from the AT-ANC-108D.

2. 

Press and hold the upper-right button.

3. 

Press the 

Reset

 button, using the end of a paper clip or other pointed object.  The upper-right button will flash 

twice.

4.  Release the upper-right button and the 

Reset

 button.

5.  Reattach the wallplate to the AT-ANC-108D.

Device Operation

Upper-right button

Reset button

The AT-ANC-108D is shipped with DHCP enabled.  Once connected to a network, the DHCP server (if available), will 

automatically assign an IP address to the unit.  The built-in web server is recommended to configure IP settings of 

the AT-ANC-180D.  If a static IP address is desired, the unit can be switched to static IP mode.  The default static IP 

address of the AT-ANC-108D is 

192.168.1.50

.

Содержание Atlona AT-ANC-180D


































































Отзывы:

Нет отзывов