AT-ANC-108D
29
1.
Login to the web server. Refer to
for more information.
2. Click the
System Settings
tab.
3. Click the
Telnet Login Mode
toggle switch. Changes take effect immediately.
• Set this toggle switch to
ON
to prompt for user credentials.
• Set this toggle switch to
OFF
to bypass user credentials request.
Telnet Login Mode
When a Telnet session is request, the AT-ANC-108D provides the option to prompt for user credentials or bypass
authentication before the Telnet session begins. This credentials prompt option can enabled or disabled. When
prompting for user credentials, use the same login information required by the built-in web server. By default, this
setting is set to
OFF
(disabled).
Device Operation
1.
Login to the web server. Refer to
for more information.
2. Click the
System Settings
tab.
3. Click the
Telnet Timeout
drop-down list and select the desired time-out interval. Values from 1 to 1000
minutes can be selected. Changes take effect immediately, once the time interval is selected.
Adjusting Telnet Timeout
When a Telnet session is active, the AT-ANC-108D can be set to monitor Telnet activity. If there is no activity within
the specified time interval, the Telnet session will automatically be terminated, adding a measure of security.
The Telnet time out interval also affects the web server time out interval. For example, if the Telnet time out interval is
set to 1 minute, then the web server will automatically perform a log out operation after 1 minute.