AT-ANC-108D
47
Device Operation
10. The
Set Destination
dialog box will be displayed.
11. Click the
Delay(ms)
field and specify the delay time.
12. Click the
Interface
drop-down list and select
Device
. This will allow an Atlona device to be selected.
13. Click the
Device
drop-down list and select the AT-OME-ST31A. The AT-OME-ST31A should be the only
available selection. If additional devices were added to the
Device Settings
tab, then more options would be
available from this drop-down list.
14. Click the
Save Changes
button to commit changes.
15. Click the
Add
button.
16.
Add the following list of commands and set the
Delay
field to
25
and set the
Interface
to
SysCMD
.
LED Blue Off 0%
// initializes all blue LED to 0% visibility
LED Red Off 0%
// initializes all red LED to 0% visibility
LED Blue 1 100%
// sets Button 1 blue LED to 100% visibility