Doc id: ENG_OMM_SB60_P14
14/26
© Rosenqvist Rail AB
5. Installation
5.1 Main functions
The Sleeper Replacer SB60 is manoeuvred hydraulically from the carrying vehicle.
Please observe that the carrying vehicle should incorporate two 2-way hydraulic outlets.
The Sleeper Replacer SB60 performs the following operations:
• Gripping
: The unit incorporates a load holding facility, pressure relief valve, as well
as an accumulator to maintain grip on the sleeper.
• Turning
: The unit can rotate the sleeper 360 degrees, with the speed adjusted by a
flow control valve.
• Tilting
: Within a range of +/- 15 degrees, with the speed adjusted by a flow control
valve.
• Excavating
: The excavating blade enables digging operations.
5.2 Manoeuvring buttons and cables
1.
Connect the charger plug, with or without adapter, see figure 4 and 5 to the 24-volt
DC charger plug connector in drivers cabin, see figure 6.
Fig 4.
With adapter
Fig 5.
Without adapter
Fig 6.
Examples of charger plug
connector in driver’s cabin
