PANDORA LIGHT PRO SERVICE-SECURITY SYSTEM
Х7 Socket (Multifunctional channels)
Use this socket when implementing bypass of original immobilizer using IMMO-KEY1
and IMMO-KEY2 multifunctional channels. Deselect any logic of INP1 and INP7 inputs
in settings. Make connections in accordance with installation scheme. The settings
of the socket are available in AlarmStudio. Disconnect the system from power supply
after changing the settings.
•
Wire «1» (Green) (INP1-/IMMO-KEY1)
— Factory setting is «Free input». This input
is multipurpose, it can operate in accordance with selected logic.
•
Wire «2» (White)
— This channel is used to brake the circuit of original immobilizer
(it connects in accordance with an installation scheme).
•
Wire «3» (Black) (INP7-/IMMO-KEY2)
— Factory setting is «Trunk trigger». This
wire connects to appropriate wire that becomes grounded when a trunk opens.
This input is multipurpose, it can operate in accordance with selected logic.
W I R I N G D E S C R I P T I O N • W I R I N G D I A G R A M
