background image

 

 

 

© 2009 GE Security, Inc. 

1 of 4

P/N 3100616 • REV 4.0 • ISS 30SEP09

Description  

The Genesis Ceiling Horn-Strobe is a fire alarm notification 
appliance designed for indoor ceilings and walls. See Table 1 for a 
list of model numbers. 

Table 1: Models 

Description Number 

Horn-strobe, 
15 to 95 multi-cd, white 

ADTGC-HDVM    

MGC-HDVM 

EGC-HDVM  

 

XLSGC-HDVM 

GC-HDVM 

 

  ZGC-HDVM 

Horn-strobe, 
15 to 95 multi-cd, white, with 
FIRE marking 

ADTGCF-HDVM   

MGCF-HDVM 

EGCF-HDVM    

XLSGCF-HDVM 

GCF-HDVM  

 

ZGCF-HDVM 

Horn-strobe, 
15 to 95 multi-cd, red, with 
FIRE marking 

EGCFR-HDVM 
GCFR-HDVM 
MGCFR-HDVM  

 

Field configurable jumper options are available for selecting the 
desired dB output, temporal or steady horn output, and strobe 
signal output. 

The horn-strobe includes a field configurable switch for selecting 
the desired candela output. The candela output setting is locked in 
place and remains visible after final installation. 

This strobe features an enhanced synchronization circuit to 
comply with the latest requirements of UL 1971 

Signaling Devices 

for the Hearing Impaired 

and the latest Canadian standard 

CAN/ULC-S526. Synchronized operation requires a separately 
installed synchronization control module. See Table 2 for a list of 
compatible synchronization modules. 

Install this device in accordance with applicable requirements in 
the latest editions of the NFPA codes and standards and 

Canadian 

Electrical Code, Part 1

, Section 32 and CAN/ULC-S524, 

Standard for 

the Installation of Fire Alarm Systems,

 and in accordance with the 

local authorities having jurisdiction. 

Table 2: Compatible synchronization module models 

Description Number 

Auto-sync output module 

SIGA-CC1S  SIGA-MCC1S 
GSA-CC1S 

  GSA-MCC1S 

Genesis signal master - 
remote mount 

ADTG1M-RM   MG1M-RM 
EG1M-RM 

  XLSG1M-RM 

G1M-RM 

  ZG1M-RM 

Installation 

WARNING:

 

To reduce the risk of shock, disconnect all power and 

allow 10 minutes for stored energy to dissipate before handling. 
 

Caution:

 

Electrical supervision requires the wire run to be broken 

at each terminal. Do not loop the signaling circuit field wires 
around the terminals. 

To install the horn-strobe: 

1.  Remove the cover by depressing the tab on the side of the 

unit with a small screwdriver. Turn the cover 
counterclockwise to release. 

2.  Set the horn signal, sound output level, and strobe signal to 

the desired settings. See Figure 2. 

3.  Connect the strobe terminals to the signal circuit field wiring. 

You must observe polarity for the unit to function properly. 
See Figure 4. 

4.  Slide the candela switch to the desired candela output (95, 

115, 150, or 177 cd) by aligning it with the indicator below the 
switch. See Figure 1. 

5.  Mount the unit onto a compatible electrical box. See Figure 5. 

6.  Replace the cover by positioning the alignment arrows 

together and rotating the cover clockwise. 

7.  Test the unit for proper operation. 

Figure 1: Candela switch 

 

1. Candela 

switch 

2. Indicator 

 

GE 

Security 

Genesis Ceiling Horn-Strobe 

Installation Sheet 

Содержание ADTGC-HDVM

Страница 1: ...ds and Canadian Electrical Code Part 1 Section 32 and CAN ULC S524 Standard for the Installation of Fire Alarm Systems and in accordance with the local authorities having jurisdiction Table 2 Compatible synchronization module models Description Number Auto sync output module SIGA CC1S SIGA MCC1S GSA CC1S GSA MCC1S Genesis signal master remote mount ADTG1M RM MG1M RM EG1M RM XLSG1M RM G1M RM ZG1M R...

Страница 2: ... 50 45 40 35 30 25 20 15 10 5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 1 2 1 Angle 2 Percentage of rated output Note Horizontal and vertical outputs have the same pattern Wiring Figure 4 Wiring Diagram 1 2 1 From NAC output 2 To next NAC output Note Signal polarity is sh...

Страница 3: ...ak output at regulated 24 VDC set for temporal tone Table 7 Audible directional characteristics vertical pattern Angle 1 Sound output dBA 2 90 Ref 0 Ref 65 and 135 3 55 and 140 6 1 Angles are measured from a perpendicular axis positive angles are up 2 Peak output at regulated 24 VDC set for temporal tone Figure 6 Light output profile 0 20 40 60 80 100 120 140 160 0 5 10 15 20 25 30 35 40 45 50 55 ...

Страница 4: ...formation Manufacturer GE Security Inc 8985 Town Center Parkway Bradenton FL 34202 USA Year of manufacture The first two digits of the DATE MFG number located on the product identification label are the year of manufacture UL ULC rating Regulated 24 DC and 24 FWR This device was tested to the regulated 24 DC FWR operating voltage limits of 16 V and 33 V Do not apply 80 and 110 of these values for ...

Отзывы: