PANDORA LIGHT PRO SERVICE-SECURITY SYSTEM
indicator), release the button after the sixth flash. If the recording was successful, a
siren will emit 1 beep, after that you can move to recording the next tag.
Saving changes:
To finish the recording, press
VALET
button once. The series of red and green flashes
of status
LED
indicator will confirm the saving.
Level 2 – Changing the factory preset of the «Service PIN-code»
Prepare a new value of the «Service PIN-code», it should consist of 4 digits (from 1 to
9). Write down or remember the new PIN-code.
Enter programming menu and then press
VALET
button twice. The system will
enter «Changing Service PIN-code» mode and the status
LED
indicator will turn off.
Changing the «Service PIN-code»:
• Enter the first digit of the code using
VALET
button. Press the button a number
of times, equals to the first digit. Pauses between presses should not exceed 1 second,
every pressing will confirm with orange
LED
indicator flash. Pause for more than 1
second and red
LED
indicator confirms the input of the first digit. Then you can enter
the next digit.
• Enter the other numbers in the same manner. The input of the fourth number
will be confirmed by series of red and green
LED
indicator flashes. The system will
wait for PIN-code re-entering.
• Enter all four digits again;
• If you were able to correctly enter the «Service PIN-code» twice, the indicator
will produce the series of red and green flashes, new PIN-code will be recorded, the
system will return to programming mode. In case of the incorrect code input the
indicator will be lit red, the system will return to programming mode.
Level 3 – Recording the idle speed to the system memory
To timely turn off the starter during automatic or remote engine start via digital or
analog tachometer input and the correct operation of the «Smart Turbo Timer», it is
necessary to record the engine idle speed.
To record idle speed to the non-volatile system memory, enter the programming
menu. Press
VALET
button three times. Switch on the ignition and start the engine
P R O G R A M M I N G T H E S Y S T E M
