PANDORA LIGHT PRO SERVICE-SECURITY SYSTEM
ANTI-HI-JACK MODE
This mode is disabled by default. Use Pandora AlarmStudio to enable this mode.
Anti-hijack mode helps to prevent aggressive seizure of the car using delayed engine
blocking on door opening.
Every time on opening/closing a door when the ignition is switched on,
immobilizer requests response from a radio tag using unique algorithm. After a door
was opened while the ignition is being switched on, if the system cannot detect a
radio tag, the engine will be stopped after 1 minute (general safety requirement). A
siren will play
«ENGINE BLOCKING WARNING»
ringtone before blocking.
If engine blocking is performed via radio relay after warning signals are over or on
new attempts to start the engine, immobilizer will only allow the engine to start when
the car is not moving, and will block it again if it starts movement.
If the car starts moving, the immobilizer will block the engine for 15 seconds. When
registered tag appears in the radio zone, blocking will be canceled and the system will
return to the normal operation.
CODE IMMObILIzER
USING ORIGINAL CAR CONTROLS
Code immobilizer (validator) is a function that allows disarming, disabling blocking
and controlling timer channels using original car controls (button, lever or pedal). To
enter immobilizer code, programmed button (lever, pedal) should be pressed a number
of times equals the first digit of the code. Pauses between presses should not exceed 1
second. Pauses more than 1 second will be interpreted as the start of next digit input.
Immobilizer code can consist max of 4 digits from 1 to 9.
After entering a correct immobilizer code, depending on the settings, either the
engine blocking will be lifted or a programmed timer channel will be activated or the
system will be disarmed
I M M O B I L I Z E R
