Pando PVMB 15-7CR, Руководство пользователя

Страница: 193 / 286

Pando Pando
Integralcooking Integralcooking
EN
Pando
EN
Vibrations. • The appliance is not properly levelled.
• Level the device with the feet
adjustable.
The rattling noise may come from the refrigerant flow, which is normal. At the
end of each cycle, you may hear gurgling noises caused by the flow of refrigerant
in your appliance.
If temperature fluctuations occur, the contraction and expansion of the interior
walls can cause popping and creaking noises.
The device
seems to make
too much noise.
• The appliance is not properly levelled.
• Level the device with the feet
adjustable.
The door does
not close
properly.
• The appliance is not properly levelled.
•
The door was reversed and not
reinstalled correctly.
• The gasket is dirty.
• The shelves are out of position.
• Level the device with the feet
adjustable.
• Check the door hinge and
reassemble it.
correctly.
• Clean the door seal.
•
Check the shelves and
replace them
correctly.
The display
shows E0, E1,
E2, E3, E4, E5,
E6, E7, E8, E9,
Ec or Et .
• Error code.
• Try resetting the
controls by disconnecting
power to the unit.
for 5 minutes and switch it on
again. If the error code
reappears, the problem cannot
be solved by the user. Call for
service.
The alarm
sounds and the
temperature
indicator is NOT
flashing (alarm
door).
• The door has been left open for more than
60 seconds.
•
Close the door or touch
any key to deactivate the door.
the alarm. The alarm is
will reset when the door is
closed.
The alarm
sounds
AND
the
temperature
display flashes
(temperature
alarm) .
•
Has the appliance door been open for
more than 60 seconds? If not, then the
temperature has risen or fallen above
the temperature that has been set. This
could be due to:
- The appliance door opens too
often.
- The ventilation opening is
clogged or too dusty.
- A prolonged power outage.
- A large amount of bottles to the unit.
•
If the answer is yes,
close the door.
- Do not open the door wider
than necessary.
- Clear obstacles and dust
- Let the appliance run
for a while to reach the set
temperature.
190