Pando E-220, Руководство по установке

Страница: 4 / 12

ANUAL DE INSTALACIÓN DE LA E-250, E-260, E-270 V1000 INSTALLATION MANUAL FOR MODEL E-220
It is recommended to install and connect the hood tubes before closing the false ceiling, if this
is not done, draw the perimeter of the perimeter of the fitting orifice of the hood on the ceiling
according to the type of outlet.
OUTLET ON SHORT SIDE OUTLET ON LONG SIDE
STANDARD
ORIFICE
FOR HOOD
ORIFICE
FOR SPECIAL
ORDER HOOD
*
NOTE: 500 x 500 area reserved for connecting the hood tubes, close the false ceiling when installed
This model is supplied with threaded rods. These are screwed into the ceiling structure. Nuts are
used to adjust the height of the hood (187 mm – 340 mm).
Make 4 holes in the ceiling, according to the dimensions indicated in the drawing, insert the plugs
the hood into the holes and screw in the threaded rods.
page 3
3 – FITTING INTO THE CEILING