25
2. Select the desired photo
send to the DPF.
Note
: The actual procedure for sending photos to the DPF varies by mobile device manufacturer/model. Refer to your mobile
device User Guide for instructions.
During the photo transmission, “
Photo Transmitting
” appears on the DPF screen. When completed, the photo(s) will automatically be
displayed in single photo mode.
S e t S l e e p M o d e
The DPF will stay on until you power it off, however, to save power you can set it to automatically go into a sleep mode when left idle for a
specific amount of time.
1. On the
HOME
screen, press
MENU
to display the
Setup Menu
.
2. Select
Set Sleep Mode
the desired setting.
OFF
(default)
= Power saver is ‘disabled’; DPF will remain on until you power it off or change the sleep mode setting
2/4/8 Hours
= The DPF will automatically go into sleep mode when left idle the specified amount of time
3. Select
Done
.
R e s e t t o F a c t o r y D e f a u l t s
If you have changed function settings, using this feature will restore settings to the factory pre-set defaults.
1. On the
HOME
screen, press
MENU
to display the
Setup Menu
.
2. Select
Reset to Factory Defaults
Yes
to reset, or
No
to leave current settings.
S y s t e m I n f o r m a t i o n
You can check your system settings for your Photo Mail, internal memory, Wi-Fi, and firmware version. Also, you may be asked for specific
information found on this screen if you call customer support.
When an option is highlighted, a brief description and/or information appears on the screen in the lower white area.
1. On the
HOME
screen, press
MENU
.
2. On the
Setup Menu
screen, select
System Information
.
3. Use
to scroll through the options.
Frame Name
: Identifying name, especially useful when you have multiple frames. To change name, see step 4.
User ID
: Your email address used when registering your DPF
(i.e., [email protected])
Photo Mail address
: The email address that you will give to family & friends for sending you Photo Mail.
Available Internal Memory
: Space that is available for importing photo, music, or video files
3G/EDGE
:
Connected to
[wireless network]
Off
= not connected
Examples
:
Wireless
Network
: Connected to ATT
IC CID
: 8901650907000112615
IMEI
: 354060011518152
Wi-Fi Network
:
Connected to
[local Wi-Fi network]
Off
= not connected
Examples
:
IP Address
: 192.168.1.95
Subnet Mask
: 255.255.255.224
Default Gateway
: 192.168.0.1
DNS Server
: 192.168.1.2
Firmware
: Current firmware version
4. To assign a custom Frame Name (i.e., Living Room, George-Office, etc.), use
to select
use the virtual keyboard to
enter your desired custom name
Done
.
(If you need help navigating the virtual keyboard, refer to
The Virtual Keyboard
on page 8.)
S u p p o r t I n f o r m a t i o n
If you call Customer Support for help with Photo Mail issues, you will be asked for specific Photo Mail troubleshooting information listed on
the
Support Information
screen. Some of the information will not be listed until after you have connected with the Photo Mail server.
Follow these steps before calling Customer Support:
1. Press
PHOTO MAIL
on the remote control, or select
Photo Mail
on the
HOME
screen to display the
Photo Mail Inbox
screen.
2. Press
EXIT
to return to the
HOME
screen.
