Pandapura SMARTCLORO, Руководство по установке

Страница: 46 / 60

46
4.2.4- Confi guration
In the confi gurati on menu you can select the confi gurati on parameters, which usually only have
to be adjusted when installing the equipment.
4.2.4.1- Change of language
From the confi gurati on menu select “Language”, press the OK butt on, and once the required
language has been selected, press the OK butt on and EXIT.
4.2.4.2- Control
The equipment allows you to select from 4 diff erent modes of control:
Manual:
The equipment produces chlorine conti nuously, depending on the % of producti on selected. If
you have a fi tt ed SMART probe Kit probe, it will ignore its value and chlorinati on will not stop
even though the set value has been exceeded. When selecti ng this mode, the equipment will
ask if you want to display the value of the Redox probe (ORP) on the main screen.
Select this mode if you do not have a SMART probe Kit, by adjusti ng producti on and hours of
fi ltering depending on the nature of your swimming pool, its volume number of bathers and
season of the year.
Automati c
Select this mode only if you do not have a SMART probe Kit (Redox) or an Amperometric probe
kit. If you do not have a probe, the equipment will act at random and end up by stopping and
showing an error.
This mode enables you to automati cally adjust the level of chlorine in your swimming pool.
Based on the adjusted set value in the “chlorine” menu, the equipment will stop when it
reaches this value, and start-up again automati cally when there is a need for chlorine.
Semi-automati c
C1: 98%
C1: 1.21ppm
pH: 6.7
→Menu
16 : 20
Relé OFF
Auto.
7 . 4V
6˚C
→Volumen, m3
Exterior
Cubierta, interr.
Flow switch:
N ↓
45 ↑
→Acido
pH Alarm:
SALIR
S
↑
→Configuración
Cloro
pH
Relé
↓
→Lengua
Control
Limpieza
4 h
...
↓
C1: 98%
C1: 1.21ppm
pH: 6.7
→Menu
16 : 20
Relé OFF
Auto.
7 . 4V
6˚C
→Volumen, m3
Exterior
Cubierta, interr.
Flow switch:
N ↓
45 ↑
→Acido
pH Alarm:
SALIR
S
↑
→Configuración
Cloro
pH
Relé
↓
→Lengua
Control
Limpieza
4 h
...
↓