CAMERA
To access the Camera menu, go to Menu > Network > Camera.
Use the Camera menu to set up a unique identifier for your camera (or a group of cameras). All command filtering happens
on the receiver side of the communication link. Use camera names and group names to address commands to a specific
camera or group of networked cameras.
Camera ID: Enter a unique camera name to use in network communications. The field is limited to eight (8) characters.
Group ID: Enter a group name to identify the camera as a member of a group of devices. The field is limited to eight (8)
characters, and the default name is DEFAULT.
Target: Specify which devices the camera can send commands to:
All: The camera can send commands to all devices on the network.
None: The camera can only receive commands. The camera cannot send commands.
Custom: The camera can send commands to a specific camera/device (enter the name of the camera/device in the
Target ID menu) or a specific group (enter the name of the group in the Target ID menu). The camera/group name
must match the name entered in the Camera/Group field of the target device(s).
Figure: Camera Menu
SERIAL
To access the Serial menu, go to Menu > Network > Serial.
The camera can communicate to external devices via the GIG-E connector.
Select one of the following protocols from the Ctrl Protocol menu:
None (Default)
Element Technica
3ality SPC 7XXX
Serial Shell
RED Command Protocol
Camera to Camera
Preston
COPYRIGHT © 2017 PANAVISION INTERNATIONAL, L.P.
FW: V-0.5.35
|
84
PANAVISION MILLENNIUM DXL
Содержание Millennium DXL
Страница 1: ...PANAVISION COM...
