6
Product overview
This product is a wireless repeater to be used with an All-In-One Headset (WX-CH450/
WX-CH455/WX-CH457P: sold separately) and a Belt Pack (WX-CT420: sold separately).
It connects to a Center Module (WX-CC411BP/WX-CC412BP: sold separately) to function.
●
It uses a system based on the 1.9 GHz DECT* standard to achieve a stable connection
over a wide area which makes for a clear audio with little interference.
* DECT (Digital Enhanced Cordless Telecommunications) is a digital cordless
communication standard.
●
Installation is easy and can be performed on a wall.
●
A USB power adaptor and USB cable are not included. Purchase commercially available
products.
System overview
A repeater is used when you need to extend the range of an All-In-One Headset or a Belt
Pack to include areas where reception was previously not available.
Two repeaters can be registered to one lane of a center module.
In the case of a single lane center module (WX-CC411BP), two repeaters can be
registered to the center module.
In the case of a dual lane center module (WX-CC412BP), one repeater can be registered
each for lane A and lane B, or two repeaters can be registered in either lane A or lane B.
System connection example
Repeater is installed within the coverage area of the center module.
2 repeaters can be connected to lane A or lane B.
Lane A
Center module
All-In-One
Headset
WX-CR480
STATUS
ID REG
Repeater
All-In-One
Headset
WX-CR480
STATUS
ID REG
Repeater
Configuration of
connected devices
Before use
WX-CR480P_PUQX1029ZAV1_OI_en-fr.indb 6
2021/11/08 13:25:13