How to detach the housing base
Step 1
Remove the fixing screws (3 pcs.*) that are securing the
housing base and the camera.
The removed screws will be required when attaching the
housing base to the camera again. Use caution not to lose
these screws.
* Special screw (Fixing screw): These screws are hexagon
screws. Use an M5 hexagon wrench.
Housing base
Camera
Fixing screws (3 pcs.)
Note:
• If the front and rear sunshields (accessory) are
attached to the camera, detach them by performing
steps 5 - 7 of "Installation" in the reverse order.
(
☞
Page 21)
Step 2
To separate the camera from the housing base, turn the
camera to the direction of the arrow as illustrated.
Step 3
Remove the attachment pipe from the upper base by
loosening 4 screws.
Housing base
Camera
REAR
x 4
18
