• When some SDHC/SD memory cards are used with
this product, the product may not work properly or
performance deterioration may be caused. Use the
SDHC/SD memory cards recommended in page 35.
Code label
The code labels (accessory) are required at inquiry for
trouble. Use caution not to lose these labels. It is recom-
mended to paste one of the labels onto the CD-ROM
case.
About the MOS image sensor
• When continuously shooting a bright light source such
as a spotlight, the color filter of the MOS image sen-
sor may have deteriorated and it may cause discolor-
ation. Even when changing the fixed shooting direc-
tion after continuously shooting a spotlight for a cer-
tain period, the discoloration may remain.
• When shooting fast-moving subjects or performing
panning/tilting operations, objects crossing the shoot-
ing area may look to be bending askew.
MPEG-4 Visual Patent Portfolio License
This product is licensed under the MPEG-4 Visual Patent
Portfolio License for the personal and non-commercial
use of a consumer for (i) encoding video in compliance
with the MPEG-4 Visual Standard ("MPEG-4 Video") and/
or (ii) decoding MPEG-4 Video that was encoded by a
consumer engaged in a personal and non-commercial
activity and/or was obtained from a video provider
licensed by MPEG LA to provide MPEG-4 Video. No
license is granted or shall be implied for any other use.
Additional information including that relating to
promotional, internal and commercial uses and licensing
may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
AVC Patent Portfolio License
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT
PORTFOLIO LICENSE FOR THE PERSONAL USE OF A
CONSUMER OR OTHER USES IN WHICH IT DOES NOT
RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN
COMPLIANCE WITH THE AVC STANDARD ("AVC
VIDEO") AND/OR (ii) DECODE AVC VIDEO THAT WAS
ENCODED BY A CONSUMER ENGAGED IN A
PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A
VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO.
NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR
ANY OTHER USE. ADDITIONAL INFORMATION MAY BE
OBTAINED FROM MPEG LA, L.L.C.
SEE HTTP://WWW.MPEGLA.COM
About the self-diagnosis function
When this product malfunctions due to exogenous noise,
etc. for 30 seconds or more, the product will automatically
reset and will return to normal state. When the product is
reset, initialization will be carried out as when the power of
the product is turned on. When the product repeatedly
resets, exogenous noise level around the product may be
high and that may cause malfunction. Contact your dealer
for instructions.
About the dehumidifying device
This product has dehumidifying device to keep the inside
at low moisture level, preventing condensation and quickly
dissipating dew if produced.
Dew may be produced depending on the conditions of
temperature, humidity, winds, and rain, and it may take
time to dehumidify.
Lens and pan/tilt head
If a lens and pan/tilt head are not performed for a long
period of time, the grease coating inside these parts may
become sticky. That may obstruct the parts from moving.
To prevent this, move the lens or pan/tilt head periodically.
Or perform position refresh periodically in the manner
described in "Position refresh".
Position refresh
During the use for a long period of time, the preset posi-
tions may become inaccurate. When "Position refresh" is
set for the created schedule, the camera position will be
corrected periodically.
Refer to the Operating Instructions (PDF) for how to per-
form the settings.
Consumable parts
The following are consumables: Replace them in accor-
dance with their lives. Their lives vary depending on use
environment and conditions.
Lens unit, panning motor, tilting motor, flat cable for pan-
ning, flat cable for tilting: Approx. 3.7 million operations
(Lifetime approx. 20000 hours is just an indication when
using the camera at +35 °C {95 °F}.)
11
