Panasonic WV-SFV130, Руководство по эксплуатации

Страница: 86 / 208

•
Default: On(High)
[Maximum shutter]
The maximum shutter time adjusts the storage time of the sensor. The following are available for the recording
duration.
Max.1/10000s, Max.1/4000s, Max.1/2000s, Max.1/1000s, Max.1/500s, Max.1/250s, Max.1/120s, Max.1/100s,
Max.2/120s, Max.2/100s, Max.3/100s, Max.1/30s, Max.2/30s, Max.4/30s, Max.6/30s, Max.10/30s, Max.
16/30s
•
Default: Max.1/30s
IMPORTANT
•
When a value with an interval longer than “Max.1/30s” (Max.2/30s/ Max.4/30s/ Max.6/30s/ Max.
10/30s/ Max.16/30s) is selected for “Maximum shutter”, the frame rate may become lower. Noise or
white dots (blemishes) may sometimes appear.
Note
•
When “Max.16/30s” is selected, for example, sensitivity will automatically be increased up to x16.
•
When “Off” is selected for “AGC”, values with an interval longer than “Max. 1/30s” (Max.2/30s/ Max.
4/30s/ Max.6/30s/ Max.10/30s/ Max.16/30s) will become unavailable.
•
The available values change depending on the light control mode settings.
[Day & Night(electrical)]
Select switching between the color mode and the black & white mode from the following.
•
Off: The color mode is selected.
•
Auto: Switches from color to black & white images when the ambient brightness (illuminance) of the camera
is approx. 1.0 lx or less. It takes time to switch between modes.
•
Default: Off
Note
•
When images are made darker by pressing the [-] (darker) [Brightness] button on the “Live” page,
images may not automatically switch to black and white mode.
[White balance]
Select a method of white balance adjustment from the following.
White color can be adjusted by “Red gain” and “Blue gain”.
•
ATW1: Selects the automatic tracing white balance mode. The camera will constantly check the color
temperature of the light source and adjust the white balance automatically. Operating color temperature
range is approx. 2,700 K to 6,000 K.
•
ATW2: Selects the automatic tracing white balance mode under a sodium lamp. The camera will adjust
the white balance automatically under a sodium lamp. Operating color temperature range is approx. 2,000
K to 6,000 K.
•
AWC: Selects the automatic white balance control mode. This adjustment is suitable for a location where
a light source is stable. Operating color temperature range is approx. 2,000 K to 10,000 K.
•
Default: ATW1
Note
•
Under the following conditions, color may not be faithfully processed. In these cases, select “AWC”.
–
When shooting a subject whose major part is a thick color
–
When shooting blue sky or sun at sunset
–
When shooting a subject whose luminance is too low
•
When “AWC” is selected, click the [Set] button.
86 Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]