Panasonic WV-SF448, Руководство по эксплуатации

Страница: 68 / 228

•
Off: Stops saving images on the SD memory card when the SD memory card becomes full.
•
Default: Off
Note
•
The overwrite setting will be as follows according to the “Save trigger” setting.
•
FTP error: Will not be overwritten.
•
Alarm input: Will be overwritten.
•
Manual, Schedule: Can be determined by selecting “On” or “Off” for “Overwrite”.
JPEG recording
This setting is available only when “JPEG” is selected for “Recording format” of the SD memory card.
[File name]
Enter the file name used for the image to be saved on the SD memory card. The file name will be as follows.
•
File name: [“Entered file name” + “Time and date (year/ month/ day/ hour/ minute/ second)”] + “Serial
number”
•
Available number of characters: 1 - 8 characters
•
Unavailable characters: " & * / : ; < > ? \ |
Note
•
When “H.264(1)” or “H.264(2)” is selected for “Recording format”, the name of the saved file will be
given automatically.
•
When “FTP error” is selected for “Save trigger”, the file name entered for “File name” on the [FTP img.
trans.] tab of the “Network” page will be used for the file name of the image saved on the SD memory
card.
[Image saving interval/Number of images to be saved - Image saving interval]
When “Alarm input” or “Manual” is selected for “Save trigger”, select an interval (frame rate) of saving images
on the SD memory card from the following.
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps
•
Default: 1fps
Note
•
When “1920x1080” is selected for the image capture size of the JPEG images to be saved, “1fps”
cannot be selected.
[Image saving interval/Number of images to be saved - Number of images to be saved]
Select a number of alarm images to be saved on the SD memory card from the following.
10pics/ 20pics/ 30pics/ 50pics/ 100pics/ 200pics/ 300pics/ 500pics/ 1000pics/ 2000pics/ 3000pics
•
Default: 100pics
Note
•
When “H.264(1)” or “H.264(2)” is selected for “Recording format”, “Pre alarm” and “Post alarm” can be
set on “H.264 recording” of [Alarm] tab.
•
“Number of images to be saved” can be configured only when “Alarm input” is selected for “Save
trigger”.
[Image capture size]
When “Manual” is selected for “Save trigger” and “JPEG” is selected for “Recording format”, select the image
capture size of the images to be saved on the SD memory card from the following.
The options of “Recording format” vary depending on “Image capture mode” on the [JPEG/H.264] tab of the
“Image/Audio” page.
68 Operating Instructions
10 Configure the basic settings of the camera [Basic]