22
IMPORTANT:
• Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX.
• If a PoE+ hub is not used, each camera must be connected to a 24 V AC power supply.
• When using 24 V AC, power supply from a PoE+ hub or router is not required.
Connecting to a network using a PoE+ hub /device when the temperature is
–30 °C {–22 °F} or less
When the temperature is –30 °C {–22 °F} or less, use a 24 V AC power supply or a tested PoE
injector.
<Required cable> Ethernet cable (category 5e or better, straight)
Powered
speaker
Powered
speaker
Confirmation monitor
*
*
Confirmation monitor
Hub, router
Ethernet cable
(category 5e or better, straight)
Ethernet cable
(category 5e or
better, straight)
Ethernet cable
(category 5e or better, straight)
Tested PoE injector
Plug-in power type
microphone
Plug-in power type
microphone
➡
24 V AC
power supply
PC
* The audio output can be switched to the monitor
output. When using the monitor output, audio
output is not available.
