e
Turn this bracket clockwise until the projection of the camera mounting bracket aligns with
"LOCK" of this bracket.
Specifications
Ambient temperature:
–10 °C to +50 °C {14 °F to 122 °F}
Dimensions:
ø185 mm × 163 mm (H)
{ø7-5/16 inches × 6-7/16 inches (H)}
Mass: Approx.
230
g
{0.51 lbs.}
Finish:
Main body : ABS resin with silver metallic coating
Dome
cover
:
PMMA resin
Clear WV-Q160C
Smoke WV-Q160S
LOCK
OPEN
Safety wire
Safety wire hook
LOCK
OPEN
LOCK
OPEN
Projection of camera mounting bracket
LOCK
OPEN
LOCK
OPEN
LOCK
OPEN
w
Mount this bracket on the camera with
aligning the projection of the camera
mounting bracket with "OPEN" of this
bracket.
Note:
Make sure to face the bracket in a
direction its Panasonic logo aligns with the
one on the camera.
Important:
Use caution not to catch the
cables.
Standard Accessories
Operating Instructions (this book) ......................... 1 pc.
The following are for installation.
Inner cover ........................................................... 1 pc.
Installations
(continued)
3. Install this bracket.
q
Connect the safety wire locked on this
bracket to the safety wire hook.
Make sure that the apical ring of the
safety wire is engaged with the safety wire
hook of the camera by pulling the safety
wire after connection.
4. Remove the protection sheet from the dome cover.
Remove the cover film from the dome cover after the installation is completed.
Note:
When the tilt angle of the camera is almost level, the upper side of images will be hidden by
the bracket reflecting on the screen. In such a case, adjust the tilt angle. Refer to the Operating
Instructions of network camera for further information.
Projection of the camera
mount bracket
For U.S. and Canada:
Panasonic System Communications
Company of North America,
Unit of Panasonic Corporation
of North America
www.panasonic.com/business/
For customer support, call 1.800.528.6747
Two Riverfront Plaza, Newark, NJ 07102-5490
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada
(905)624-5010
www.panasonic.ca
© Panasonic Corporation 2017
For Europe and other countries:
Panasonic Corporation
http://www.panasonic.com
Panasonic Corporation
Osaka, Japan
Authorised Representative in EU:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
