![background image](http://html.mh-extra.com/html/panasonic/wv-nw502se/wv-nw502se_installation-manual_277932011.webp)
11
Turn the power off when cleaning of this
product.
Failure to observe this may cause injury.
[Precautions for use]
This product has no power switch.
When turning off the power, turn off a circuit
breaker.
To keep on using with stable performance
Do not use this product in hot and humid
conditions for a long time. Failure to observe
this causes component degradation resulting
in life shortening of this product.
(Recommended operating temperature:
+35 °C or lower)
Do not expose this camera to direct heat
sources such as a heater.
Do not touch the dome cover with your
bare hands.
A dirty dome cover causes deterioration of
picture quality.
Handle this product with care.
Do not abuse this product. Avoid striking,
shaking, etc. Failure to observe this may
cause trouble. If a strong shock or vibration
is applied to the enclosure, it may cause
damage or allow water to enter this product.
About the PC monitor
Displaying the same image on a CRT type
monitor for a long time may damage the
monitor. It is recommended to use a screen-
saver.
When an error is detected, this product
will restart automatically.
When an error is detected, this product will
restart automatically. This product will be
inoperable for around 2 minutes after the
restart just as when the power is turned on.
Product disposal/transfer
Data saved on the media used with this prod-
uct may be categorized as "Personal
Information".
Therefore, if this product is handled by the
third party because of disposal, transfer or
repair, extreme care should be required for
data handling.
Cleaning this product body
Be sure to turn off the power before cleaning.
Failure to observe this may cause injury. Do
not use strong abrasive detergent when
cleaning this product. Otherwise, it may
cause discoloration.
When using a chemical cloth for cleaning,
read the caution provided with the chemical
cloth product.
When the dirt is hard to remove, use a
mild detergent and wipe gently.
When the dirt is hard to remove, use a mild
detergent and wipe gently. Then, wipe off the
remaining detergent with a dry cloth.
Cleaning the lens
Use a lens cleaning paper (used to clean
camera lenses or lenses of spectacles).
When using solvent, use an alcohols solvent
and do not use a thinner or a glass cleaner.
Transmission interval
Image transmission interval may become
slow depending on the network environment,
PC performance, shooting subject, access
number, etc.
About SDHC/SD memory card
• Before inserting the SDHC/SD memory
card, turn off the power of this product
first. Otherwise, it may cause malfunction
or damage data recorded on the
SDHC/SD memory card. Refer to page
24 for descriptions of how to insert/
remove an SDHC/SD memory card.
• When using an unformatted SDHC/SD
memory card, format it using this prod-
uct. Recorded data on the SDHC/SD
memory card will be deleted when for-
matted. If an unformatted SDHC/SD
memory card or an SDHC/SD memory
card formatted with other devices is
used, the camera may not work properly
or performance deterioration may be
caused. Refer to the Operating
Instructions (PDF) for how to format an
SDHC/SD memory card.
Содержание WV-NW502SE
Страница 42: ...42 ...