Panasonic WV-NW502SE, Руководство по установке

Страница: 24 / 44

24
x
Remove the enclosure and inner
dome from the main body by loos-
ening the three fixing screws.
Loosen the three fixing screws by using
the provided bit for tamperproof screw.
Detach the inner dome while pushing the
parts with the "PUSH" indication.
Important:
• Do not hold the inner dome when carry-
ing the camera. Otherwise, the camera
part may fall and it may damage the
camera.
c
Secure the camera to the bracket
with the camera fixing screw (red,
1position).
The illustration is an example of using
the accessory camera mount bracket.
Important:
• Be sure to tighten the camera fixing
screw.
Failure to observe this may cause cam-
era trouble due to water leakage or cam-
era falling.
(Recommended tightening torque:
0.78 N·m )
v
Remove the screw for transport pro-
tection (blue, 1 position) with a
Phillips screw driver.
LOC
K
PU
SH
PUSH
Press the parts with the
"PUSH" indication.
LOC
K
Screw for transport
protection (blue)
TOP
LO
CK
INITIA
L
SET
ONIT
OR
OUT
Camera fixing screw (red)
* The camera fixing
screw shall be
securely tightened.