7
Precautions
The following points as well as the contents of "Warning"
and "Caution" shall be observed.
Refer installation work to the dealer.
Installation work requires technique and experiences.
Otherwise injury, or damage to this product may result.
Be sure to consult the dealer.
Do not insert any foreign objects.
This could permanetly damage this product. Turn the
power off immediately and contact qualified service
personnel for service.
Do not attempt to disassemble or modify this
product.
Failure to observe this may cause fire or electric shock.
Consult the dealer for the repair or inspections.
Stop operation immediately when something is
wrong with this product.
When smoke goes up from this product or the smell
of smoke comes from this product, continued use will
result in fire, injury, or damage to the product.
Turn the power off immediately and contact qualified
service personnel for service.
Select an installation area that can support the total
weight.
Selecting an inappropriate installation surface may
cause the product to fall down or topple over, resulting
in injury.
Installation work shall be started after sufficient
reinforcement.
Periodic inspections shall be conducted.
Rust on the metal parts or screws may cause the
product to fall down resulting in injury or accidents.
Consult the dealer for the inspections.
Do not damage the power cable.
Do not damage, fabricate, twist, stretch, bundle, or
forcibly bend the power cable. Do not place heavy
objects. Keep away from heat sources.
Use of the damaged power cable may cause electric
shock, short circuit, or fire.
Consult the dealer for repair.
Do not install this product on a place that is greatly
influenced by wind.
Installation on a place where the wind speed is 40 m/s
or more per second may cause a fall of the product
resulting in injury or accidents.
This product shall be installed in a vibration-free
place.
Failure to observe this may cause screws and bolts to
be loosened and consequently to fall resulting in injury.
Install this product high enough to ensure that
people don't hit their heads.
Failure to observe this may cause a drop resulting in
injury or accidents.
Do not strike or give a strong shock to this product.
Failure to observe this may cause injury or fire.
Turn the power off when do wiring of this product.
Failure to observe this may cause electric shock. In
addition short circuit or wrong wiring may cause fire.
Do not use this product in an atmosphere of
flammable gases.
Failure to observe this may cause injury by explosion.
Avoid installing this product in locations where it is
subject to damage by salt or corrosive gas.
Otherwise the mounting fixtures will deteriorate, causing
the product to fall down and leading to accidents.
Use the specified mount bracket.
Failure to observe this may cause a drop resulting in
injury or accidents.
Do not rub the edges of metal parts with your hand.
Failure to observe this may cause injury.
Tighten screws and mounting fixtures to the
specified torque.
Failure to observe this may cause a drop resulting in
injury or accidents.
The measures of protection against a fall of this
product shall be taken.
Failure to observe this may cause a drop resulting in
injury or accidents.
Do not touch the main body while this product is
panning/tilting.
Fingers may be caught up in the moving part, and that
may result in injury.
Do not hang down from this product or use this
product as a pedestal.
Failure to observe this may cause injury or accidents.
