Panasonic WV-CW504S Скачать руководство пользователя страница 38

Страница: 38 / 44

Troubleshooting

Before asking for repairs, check the symptoms with the following table.
Contact your dealer if a problem cannot be solved even after checking and trying the solution in the
table or a problem is not described below.

Symptom

Cause/solution

Reference

pages

No image displayed

• Are the power cord and coaxial cable

connected appropriately?

→

Check whether the connection is

appropriately established.

• Is the adjusting monitor connected ?

→

Check whether connection is estab-

lished.

• Is the monitor brightness appropriately

adjusted, or is the contrast appropriately

adjusted?

→

Check whether the monitor settings

are appropriate.

–

• Were the shock absorbers in the dome

cover already removed?

→

Confirm whether the shock absorbers

have been already removed.

–

Blurred image

• Is the dome cover free from contamina

tion and/or flaws?

→

Check the dome cover.

–

• Is the focus adjusted correctly?

→

Check if the focus is adjusted correct-

ly.

• Is the lens of the camera soiled with dirt

or dust?

→

Check whether the lens of the camera

is clean.

–

Damaged power cord

sheathing

The power cord and connector is dam-

aged. Use of the damaged cord or con-

nector may cause electric shock or fire.

Turn off the power immediately and request

repair to your dealer.

–

Heated portion of power line

consisting of power cord

during use

Warmed power cord or loos-

ened connection by bending

or stretching during use

Содержание WV-CW504S













































Результаты поиска

Содержание WV-CW504S

Отзывы:

Похожие инструкции для WV-CW504S

Бренды по названию

Популярные бренды

Panasonic WV-CW504S, Руководство по установке

Результаты поиска

Содержание WV-CW504S

Отзывы:

Похожие инструкции для WV-CW504S

Бренды по названию

Популярные бренды