41
Maintenance
(continued)
Zoom wheel controller
adjustment value
Zoom wheel controller adjustment
The zoom wheel controller is adjusted (zoom calibration)
Note:
• The displayed zoom wheel controller state value changes according to the direction of rotating the zoom wheel controller.
• The displayed zoom wheel controller state value may change depending on the equipment, or every time the adjustment
is made.
• When returning the zoom wheel controller to the center, do not return it slowly, but quickly release your hand as if to flip it.
If the joystick is returned slowly, it may stop not at the center but at a position that is slightly off from the center.
Operation procedure
1
Switch ON the power supply while simultaneously
pressing
+
The administrator ID input screen is displayed.
2
Input the administrator ID using the numeric
buttons
The administrator ID that has been input is displayed on the
screen.
3
Press
The password input screen is displayed.
4
Enter the administrator password using the numeric
buttons
5
Press
When a wrong administrator ID or password has been input,
the blinking message "invalid" is displayed for a few
seconds, and then the display returns to the administrator ID
input screen. Input again the correct administrator ID and
password.
When the administrator ID and password have been input
correctly, the zoom wheel controller calibration settings
confirmation screen is displayed.
Zoom wheel controller in the central state
The zoom wheel controller adjustment value is displayed in
the top right part of the screen.
When the zoom wheel controller is moved in the left and
right directions, the adjustment value displayed changes in
the range of -4 (when rotated to the left end (wide angle end)
position) to 0 (hand released from the zoom wheel controller
letting it return to the central position) to 4 (zoom wheel
controller moved to the right end (telephoto) position).
The state in which the zoom
wheel controller is rotated to
the left end (wide angle end)
The state in which the zoom
wheel controller is rotated to
the right end (telephoto end)
When the zoom wheel controller is rotated to the left and
right and to the center, if the adjustment value displayed is
not in the rage -4 to 0 to 4 as described above, since it is
likely that the adjustment of the zoom wheel controller has
shifted, carry out adjustment of the zoom wheel controller
according to the following procedure.
Right (telephoto end)
Left (wide angle end)
6
Press
The zoom wheel controller (telephoto end) settings screen is
displayed.
The zoom wheel controller state value is displayed in the top
right part of the screen.
