![background image](http://html.mh-extra.com/html/panasonic/wv-cs650/wv-cs650_operating-instructions-manual_277857009.webp)
■
Setup Menu Description
●
RS485 site communication (only WV-CSR650)
Communication parameters
• Full/Half duplex (page 31)
• Transmission speed (2 400 - 19 200 bps) (page 11)
• Parity bit, Stop bit, Flow control (page 11)
• Retransmit time, Delay time, Alarm output (pages 11, 12)
• Camera units (96 units max.) (page 31)
• Termination ON/OFF (page 31)
• Reset parameters (page 31)
●
PRESET
(1) Position (POSITION SET)
POSITION SET adjusts the camera picture by panning, tilting, zooming and focusing.
See page 13 for the setting.
(2) Preset Identification (PRESET ID)
A preset ID (identification of up to 16 alphanumeric characters) can be displayed on the screen.
See page 14 for the setting.
(3) Light Control (ALC/MANUAL)
ALC/MANUAL refers to the mode of the incoming light level control.
See page 15 for the setting.
(4) Dwell Time (DWELL TIME)
DWELL TIME is the duration that the picture of each camera position is displayed. You can select a
preset duration from the menu.
See page 16 for the setting.
(5) Scene File (SCENE FILE)
SCENE FILE is used to memorize the camera shooting scene. You can store up to 10 (scene file No.
1 to No. 10) camera shooting scenes. The camera functions below are available for detail setting of
the scene files to be stored. These functions are stored in memory together with the scene files.
Camera functions available for detail setting of scene files are: shutter speed, AGC, electronic
sensitivity enhancement, white balance, motion detector and AF mode.
See page 16 for the setting.
●
Home Position (HOME POSITION)
HOME POSITION is the camera’s basic position. It returns to this position automatically, when a specified
time has elapsed after a manual operation.
See page 17 for the setting.
●
Self Return (SELF RETURN)
SELF RETURN is the time-out parameter for returning to the home position.
See page 17 for the setting.
- 6 -