![background image](http://html.mh-extra.com/html/panasonic/wv-cs650/wv-cs650_operating-instructions-manual_277857010.webp)
- 7 -
●
AUTO MODE
AUTO MODE is for setting the movement of the camera. You can select from three automatic operation
modes and one manual operation mode as follows:
OFF mode:
No automatic operation. The camera can be operated only manually.
SEQ mode:
The camera operates in the sequence of preset positions in numerical order.
SORT mode:
The camera operates in the sequence of preset positions counterclockwise from Pan/Tilt
Starting Point.
AUTO PAN mode:
The camera automatically turns within the preset panning range.
See page 18 for the setting.
●
FLIP-A-CHIP
FLIP-A-CHIP is for setting the movement of the camera by using the joystick.
See page 19 for the setting.
●
LOCAL/REMOTE
LOCAL/REMOTE determines the relationship between camera operation and ON/OFF status of the
controller. You can select one of the following two modes:
LOCAL:
The camera continues operating in auto mode when the controller is turned OFF.
REMOTE:
The camera stops operating in auto mode approx. 1 minute after the controller is turned off.
See page 19 for the setting.
●
Camera
(1) Camera Identification (CAMERA ID)
You can use the camera identification (CAMERA ID) to assign a name to the camera. The camera ID
consists of up to 16 alphanumeric characters. You can select whether to have the camera ID
displayed on the monitor screen or not.
Note:
See page 20 for the setting.
(2) Light Control (ALC/MANUAL)
You can select the mode for adjusting the lens iris.
The modes are as follows:
ALC:
The lens iris is automatically adjusted according to the brightness of the object.
You can select one of two modes (SUPER-D ON or SUPER-D OFF).
MANUAL:
The lens iris is fixed at the value you have set regardless of the brightness of the object.
• ALC Mode with SUPER-D ON
Super Dynamic Function (SUPER-D)
The important object in a scene is usually placed in the centre of the monitor’s screen. In SUPER-D
mode, more photometric weight is given to the centre of the screen (where the important object is
located) than to the edge of the picture (where a bright backlight would most likely be located).
You can use the SUPER-D function if you select ALC. It eliminates interference by strong background
lighting which makes the camera picture dark, such as a spotlight.
Note:
See page 21 for the setting.
• ALC Mode with SUPER-D OFF
In this mode, the picture is divided into 48 areas. If there is a source of brightness that interferes with
the clarity of the picture in these masks, corresponding areas mask the light to keep the clarity of the
picture.