-25-
Blinking
3. Move the cursor to the area where backlight is
bright and press
I
to mask that area. The mask
turns to white. (When the cursor is moved on an
area that has already been masked, the mask and
cursor start blinking.)
5. After masking is completed, press
I
for 2 sec-
onds or more. The ALC CONT menu appears.
6. If you want to change the video output level (pic-
ture contrast), move the “I” cursor for LEVEL and
adjust the level.
Note:
If ON is selected for the SUPER-D2 parameter, a
shadow (black line) may appear at the boundary
between the bright and the dim scene. This is a
natural phenomenon and does not indicate trou-
ble.
Blinking
Turns to white
4. Repeat step 3 to mask the desired area. To can-
cel masking, move the cursor to that area and
press
I
.
