-22-
1. Camera Identification (CAMERA ID)
Setting
You can use the camera identification (CAMERA ID) to
assign a name to the camera. The camera ID consists
of up to 16 alphanumeric characters. The camera ID
display can be switched on or off on the monitor
screen.
To edit the CAMERA ID
1. Move the cursor to the CAMERA ID parameter.
2. Press
I
. The CAMERA ID menu appears. The
cursor on the letter “0” is highlighted.
3. Move the cursor to the character you want to edit
by pressing
L
/
M
/
J
/
K
.
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$ÄÜÖÆÑÅ
SPACE
POSI RET END RESET
................
Character Cursor
Pointer
Character
Area
Command
Editing
Area
CAMERA ID menu
4. After selecting the character, press
I
. The
selected character appears in the editing area.
(The pointer in the editing area moves to the right
automatically at this moment.)
5. Repeat the steps above until all characters are
edited.
To enter a blank space in the CAMERA ID
Move the cursor to SPACE and press
I
.
To replace a specific character in the CAMERA ID
1. Move the cursor to the editing area by pressing
K
.
2. Move the pointer to the character to be replaced
by pressing
L
or
M
. Then move the cursor to
the character area and select a new character.
3. Press
I
to determine the CAMERA ID.
To erase all characters in the editing area
Move the cursor to RESET and press
I
. All charac-
ters in the editing area disappear.
SETTING PROCEDURES
