Caution for Mounting the Lens
The lens mount should be a C-mount or CS-mount (1”-
32UN) and the lens weight should be less than 450
g
(0.99 lbs). If the lens is heavier, both the lens and cam-
era should be secured by using the supporter.
The protrusion at the rear of the lens should be as
shown below:
C-mount:
Less than 13 mm (1/2”)
CS-mount: Less than 8 mm (5/16”)
-12-
The following adjustment should be made by qualified
service personnel or system installers.
1. Loosen the screws on the back focal adjusting
ring.
2. Turn the back focal adjusting ring to the desired
position.
Caution:
When the C-mount lens is mounted, do
not rotate the ring counterclockwise by force
after it. If the ring is rotated by force, the inner
lens or CCD image sensor may be damaged.
3. Tighten the screws on the back focal adjusting
ring.
Focus adjust for
C-mount lens
Focus adjust for CS-mount lens
Screws
Back Focal
Adjusting Ring
FOCUS OR BACK FOCAL ADJUSTMENT
Содержание WV-CP450
Страница 3: ......