background image

15

to detect white area of white balance is displayed full-screen by default. 
To change the white balance detection area, start from step 4.

Step 4

Move the cursor to "POSITION" and press the [SET ] button. 

Step 5

Press the [UP], [DOWN], [RIGHT] and [LEFT] buttons to move to the upper-left part of the area 
to be set, and press the [SET ] button. 

Step 6

Press the [UP], [DOWN], [RIGHT] and [LEFT] buttons to move to the lower-right part of the area 
to be set, and press the [SET ] button.

7

 Digital noise reduction function setting [DNR]

The digital noise reduction function reduces noise automatically under the condition of low illu-
minance. 
The effect level of the noise reduction function is selectable from the following. 

LOW:

 Low level of noise reduction (small residual image) 

HIGH (default):

 High level of noise reduction (large residual image) 

8

 Black-and-white mode setting [D&N (IR) ] 

CP310

CP310

CP300

  

 

 

[D&N (ELE) ] 

CP310

CP310

CP300

The  settings  relating  to  the  black-and-white  mode  can  be  configured.  Follow  the  procedure 
below.

Step 1

Move the cursor to "D&N (IR)" or “D&N (ELE)” and select the mode from the following. 

CP310

CP310

CP300

 

AUTO1 (default):

  Automatically  switches  between  color  and  black-and-white  images 

in  accordance  with  the  illuminance.  The  black-and-white  mode  is 
selected for dark images, and the color mode is selected for bright 
images.

 

AUTO2: 

  Used for environment illuminated by halogen lamp. (wavelength 

 800 nm)

 

ON: 

  Displays black-and-white images.

 

OFF: 

 Displays color images.

AUTO1

 **

D&N(IR) 

**(1)

LEVEL

HIGH

DURATION TIME

                S  L

BURST(BW)

ON

 RET TOP END

.I..

“CAMERA SETUP” screen

“D&N (IR)” screen 

    **CAMERA SETUP** 

SCENE1

 ALC/ELC     ALC    

 SHUTTER     OFF

 AGC         ON(HIGH)

 SENS UP     OFF

 WHITE BAL   ATW1

 DNR         HIGH

      AUTO1

 VMD

 RET TOP END

D&N(IR)

OFF

Содержание WV-CP310G





























Отзывы: