![background image](http://html.mh-extra.com/html/panasonic/wv-cp150e/wv-cp150e_operating-instructions-manual_277796028.webp)
-25-
7. Special Menu (SPECIAL)
This menu lets you adjust and set up the video signal
of the camera to meet your requirements.
Move the cursor to END on the bottom line of the CAM
SET UP menu and press
or
simultaneously for
2 seconds or longer. The SPECIAL menu appears on
the monitor as shown below.
7-1. Chroma Level Setting (CHROMA GAIN)
1. Move the cursor to the CHROMA GAIN parameter.
2. While observing the vectorscope or colour video
monitor, move the “I” cursor to adjust the chroma
level.
7-2. Aperture Sharpness (Softness) Setting (AP
SHARP/AP SOFT)
Note:
This item changes according to the position
of the detail level selector (SOFT/SHARP) on
the side of the camera.
1. Move the cursor to the AP SHARP (AP SOFT)
parameter.
2. While observing the vectorscope or video monitor,
move the “I” cursor to adjust the aperture gain
level.
7-3. Pedestal Level Setting (PEDESTAL)
1. Move the cursor to the PEDESTAL parameter.
2. While observing the waveform monitor/oscillo-
scope or video monitor, move the “I” cursor to
adjust the pedestal level (black level).
To reset to the factory settings
1. Move the cursor to the CAMERA RESET parame-
ter. The words PUSH SW start blinking.
2. While holding down
and
, press
for 2
seconds or longer. The camera is reset to the fac-
tory settings.
To close the SPECIAL menu and return to the CAM
SET UP menu
Move the cursor to RET and press
.
To close the SPECIAL menu and return to the
camera picture
Move the cursor to END and press
.
** CAM SET UP **
CAMERA ID OFF
ALC/ELC ALC
SHUTTER ---
AGC ON
WHITE BAL ATW
AUDIO LEVEL ....I....
- +
END SET UP ENABLE
↵
↵
↵
** SPECIAL **
CHROMA GAIN ....I....
AP SHARP ....I....
PEDESTAL .I.......
HUE .I.......
- +
CAMERA RESET PUSH SW
RET END
Содержание WV-CP150E
Страница 3: ......