2-5
4. Adjustment Procedure
8
The Location of Test Points and Adjusting Controls refer
to Wiring Diagram on page 3-1.
4.1. Adjustment Procedure-1
(1) Power Supply Voltage Confirmation
8
Confirm that +9.0V line voltage is obtained 9.0 V ± 1.0 V
at 50 mA.
8
Confirm that +5.0V line voltage is obtained 5.0 V ± 1.0 V
at 250 mA.
(2) Focus Adjustment
Test Point: Video Output Connector
Adjust: Lens
8
Open the Lens iris.
8
Set the Radiation Chart 1.2 m away from the Camera.
8
Referring to Fig. 4-4-1, the Lens is rotated to the left and
right, adjust the Lens to obtain a focal point while viewing
the image of the Video Monitor.
4.2. Adjustment Procedure-2
(EVR
Adjustment)
4.2.1. Installation of EVR Software to
Personal Computer
1.
Open the Adjustment package folder.
2. Open the Install package.
3. Open DISK1 file.
4. Excute the SETUP.EXE.
(Store the software to the default position)
5. Click
OK
button of "iotest Setup" program screen.
6. Click the icon button of "iotest Setup" program screen.
(Software is saved into C:¥Program Files¥ by file name
"iotest")
7. Click
OK
button of "iotest Setup" program screen.
8. Open the Adjustment package folder.
9. Copy "scp060601_CF102_PAL-16k256kE2P_XP.exe"
into the iotest folder.
10. Then open the Install package and copy all files in
DISK4 into the iotest folder.
4.2.2. Execution of Adjustment Software
1.
Open the iotest folder.
2. Execute the adjustment software (scp060601_CF102_
PAL-16k256kE2P_XP.exe).
The following adjustment menu will be displayed. (Make
sure "EEPROM (E)" is selected as shown.)
Note:
If not operating, download following files from the
internet and arrange into C:¥WINDOWS¥SYSTEM32.
File names : MSVBVM60.DLL, COMDLG32.OCX
(DISK5 are in the same file)
Fig. 4-1-1
Lens
