2-2
2. Disassembling Procedure for
Adjustment
8
Referring to Fig. 2-1, turn the Top Cover in the Direction
of the arrow.
8
Referring to Fig. 2-2, remove three screws that secure
the Bottom Plate and remove the Button Plate from the
Main Unit.
8
Referring to Fig. 2-3, disconnect the connector CN3 on
the I/F Board and remove the Flexible Cable of the Main
Unit.
Fig. 2-1
Fig. 2-2
Fig. 2-3
8
Referring to Fig. 2-4, remove one screw (Special Screw)
that secure the Camera Unit.
8
Referring to Fig. 2-5, release the hook part of the Camera
Unit by using the pliers for lead or equivalent and remove
the Camera Unit from the Main Unit.
When you release the hook part, because there is a
risk of damege, please be careful.
8
Referring to Fig. 2-6, disconnect the connector CN3 on
the Main Board and remove the Flexible Cable from the
Camera Unit.
Fig. 2-4
Fig. 2-5
Top Cover
Remove three screws.
Bottom Plate
Remove one screw.
Camera Unit
Fig. 2-6
Camera Unit
CN3 on
Main Board
Flexible
Cable
Main Unit
CN3 on I/F Board
Bottom Plate
Flexible Cable
Camera Unit
Hook
