97
Go to the Desired Point by Designating the Time and Date (JUMP)
It is possible to search files by designating the time and date and to then play the file.
Step 1
Bring up the list display window in the local mode.
Select "List view(L)" from "View(V)" on the menu bar or
click the [List view] button on the toolbar to bring up
the list display window when displaying another win-
dow, such as the single file playback window, in the
local mode.
Step 2
Select "Jump(J)..." from "View(V)" on the menu bar or
click the [Jump] button on the tool bar. The jump win-
dow will be displayed.
Perform the following settings:
q
Date
Designate the date. Select the date from the pull-
down menu displayed by clicking the button.
w
Time (hour: minute: second)
Designate the time.
e
[OK] button
Click this button to save the settings.
r
[Cancel] button
The window will be closed.
Step 3
Click the [OK] button after designating the time and
date.
Searching will start. The jump window will be closed
and the applicable file (recorded at the designated
time) will be played in the single file playback window.
Depending on the designated time, there may be no
applicable file. In this case, one of the following mes-
sage windows will be displayed.
• Change the designated date and time.
• Select OFF for filtering when trying to search from
all the files not from the displayed list.
Note:
It may be impossible to jump to the end time of the
file.
q
w
e
r
