127
r
Title
Enter the name of the camera. The default title is
"CAM#" (#: camera channel).
Enter up to 16 alphanumeric characters. The fol-
lowing characters are not available (\, /, :, *, ?, ", <,
>, |).
t
Model number
The model number obtained from the recorder at
the connection test will be displayed. For a camera
channel to which no camera is assigned, "--" will be
displayed.
(However, this function will not work when the ver-
sion of the recorder in use is the following. Refer to
the operating instructions of the recorder for how to
check the version of the recorder.
WJ-ND300: Older than ver. 3.00
y
Live image reception
Select "Recorder" or "Camera" to determine to how
to receive live images.
When "Recorder" is selected, live images will be
received via a recorder.
When "Camera" is selected, live images will be
received from a camera directly.
Important:
• Even when "Camera" is selected, it is necessary to
register the camera in the recorder. Refer to the
operating instructions of the recorder in use for how
to register the camera.
• When "Camera" is selected, live images can be
monitored even when "OFF" is selected for "LIVE
VIDEO" on the recorder.
Note:
Depending on the model or the version of the
recorder/camera in use, it may be impossible to
select "Camera". The applicable models/versions
are the following.
WJ-ND300: Ver. 3.00 or later
WJ-ND200: Ver. 1.00 or later
WV-NP472: Ver. 2.20 or later
WV-NS32x: Ver. 2.20 or later
WV-NW47x: Ver. 2.20 or later
WV-NP24x: Ver. 1.20 or later
WV-NP100x: Ver. 1.20 or later
WJ-NS202: Ver. 1.00 or later
u
COMPRESSION
Select "JPEG" or "MPEG-4" to determine the
image compression method.
When "JPEG" is selected, live images can be mon-
itored in JPEG format.
When "MPEG-4" is selected, live images can be
monitored in MPEG-4 format.
Notes:
• This setting is available only when the model num-
ber of the camera is WV-NP24x, WV-NP100x or
WV-NS202, and also when "Camera" is selected
for "Live image reception".
• The image compression method obtained from the
recorder at the connection test will be displayed
when the model number of the camera is not WV-
NP24x, WV-NP100x or WV-NS202, or when
"Recorder" is selected for "Live image reception".
i
Type
Select "PTZ Camera" or "Fixed Camera" from the
pull-down.
When "PTZ Camera" is selected, it is possible to
carry out all operations of the camera.
When "Fixed Camera" is selected, it is possible to
control the camera except panning/tilting opera-
tions, turning on/off the auto functions and the pre-
set function.
o
[OK] button
Click this button to save the settings and close the
camera setup window.
!0
[Cancel] button
Click this button to cancel the saving of the edited
settings and close the camera setup window.
Step 4
Click the [OK] button after completing the settings for
each camera channel.
The message window may be displayed when the [OK]
button is clicked. When the message window is dis-
played by clicking the [OK] button, refer to the page
152 and follow the descriptions.
HD300
ND300
ND300
ND300
