Panasonic WJSX650 - SWITCHER, Руководство по эксплуатации

Страница: 11 / 100

11
RESET No.
MODE
q w e
VIDEO OUT 3 VIDEO OUT 4 VIDEO OUT 2 IN X-2 VIDEO OUT 1 ALARM IN
IN X-1
16
32
15
31 30
14 13
29 28
12 11
27 26
10 9
25
CAMERA IN
24
8 7
23 22
6 5
21 20
4 3
19 18
2 1
17
EXTENSION 3 IN EXTENSION 2 IN
4
MODE RS485 (CAMERA) RS485 (CAMERA)
3
MODE MODE MODE
2 1
IN C-3
IN C-3 board
IN X-2 board
IN X-1 board
u u
i
!0
!1
4 3
MODE RS485 (CAMERA) RS485 (CAMERA) MODE MODE MODE
2 1
IN B-3
MODE RS485 (CAMERA) RS485 (CAMERA) MODE MODE MODE
4 3 2 1
EXTENSION 1
TERM.
OFF
ON
OUT IN IN A-3 EXTENSION 3 OUT EXTENSION 2 OUT
IN A-3 board
IN B-3 board
t u u r
i
y
o y
■
Video Input Board WJ-PB65C32
Video input board is composed of a main board (installed into the front side) and rear boards (x 3)(installed into the rear side).
●
Front View
q
Board Number Switch (No.)
Refer to p. 17 Switch Settings for Video Input Main
Board for details.
w
Input Mode Selection Switches (MODE)
Set all switches to OFF.
●
Rear View
IN A-3/IN B-3/IN C-3 board
Note: These boards are originally installed into WJ-SX650
and WJ-SX650U, and not supplied to optional video input
boards. (IN A-3 board is installed into WJ-SX650U only.)
r
Extension Ports 1 (EXTENSION 1: IN, OUT)
These ports connect to an optional card cage.
t
Termination Selector (TERM: ON, OFF)
Turns on or off the line termination of
r
.
y
Extension Ports 2, 3 (EXTENSION 2, 3: IN, OUT)
Each port connects to an optional card cage.
u
RS-485 Camera Ports 1 to 4 (RS485 (CAMERA) 1 to
4)
These ports connect to RS-485 cameras.
i
RS-485 Camera Mode Switches 1 to 4 (MODE 1 to 4)
These switches are moved to change the communica-
tion modes of
u
.
IN X-2 board
o
Video Output Ports 1 to 4 (VIDEO OUT 1 to 4)
These ports loop through video input signals supplied
to
!1
.
!0
Alarm Input Port (ALARM IN)
Connects to an alarm sensor (door switch, etc.).
IN X-1 board
!1
Camera Input Connectors 1 to 32 (CAMERA IN 1 to
32)
These connectors accept video input signals from cam-
eras or recorders.
e
Reset Switch (RESET)
This button is pressed to reset this board.
Note: In normal operation, you need not press the but-
ton.