Panasonic WJMPU955 - PROCESSING UNIT - TMU, Руководство по эксплуатации

Страница: 44 / 62

44
Before starting the following procedures, all system compo-
nents must be turned on.
The following procedures apply when the WV-CU360C
System Controller is connected to the system.
■
Log-in
1. Turn on the power switches of all system components.
2. Turn on the power of the WV-CU360C System
Controller by connecting the AC adapter to the AC out-
let.
The LINK indicator lights up and "NO USER" will appear
on the LED display of the system controller.
3. Select your registered operator ID number (up to 5 dig-
its) by pressing the numeric buttons, then press the
[CAMERA (ENTER)] button.
The underline display now appears on the LED display
of the controller.
4. Select your registered Password (up to 5 digits) by
pressing the numeric buttons, then press the [CAM-
ERA (ENTER)] button.
If operator ID and password are correct, "READY" will
appear on the LED display.
Note: If an operator ID and password error have
occurred, the PROHIBITED indicator on the con-
troller will light up and "NO ACCESS" will blink on
the LED display for about 3 seconds. Then the
Log-in procedure automatically returns to the start.
Log-in and Log-out
PROGRAM
PRESET
CALL
PRESET
AUX1 OFF
ALM S
CAM ID T&D
AUX1 ON
VLD S
GEN
WIPER
SYS S
AUX2 OFF
ALM H
AUX2 ON
VDL H
ALL
SHIFT BLK EXIT
CLEAR
(ESC)
DEF OFF DEF ON
CAMERA
(ENTER)
AUTO
PAN
MON STATUS
PROGRAM
PRESET
CALL
PRESET
AUX1 OFF
ALM S
CAM ID T&D
AUX1 ON
VLD S
GEN
WIPER
SYS S
AUX2 OFF
ALM H
AUX2 ON
VDL H
ALL
SHIFT BLK EXIT
CLEAR
(ESC)
DEF OFF DEF ON
CAMERA
(ENTER)
AUTO
PAN
MON STATUS