Panasonic WJMPU955 - PROCESSING UNIT - TMU, Руководство по эксплуатации

Страница: 17 / 62

17
Main Features
■
Operator Functions
●
Operator Area Changes
The system can be divided into multiple areas (up to 64),
and an operator can change from one area to another if
they have the necessary permission.
●
Operator Log On and Off
Operators are assigned a user ID and password by a sys-
tem administrator. A user ID and password are required for
any operator to log on to the system. System administrators
can specify to automatically log operators off if there is no
activity for a pre-defined time period.
●
Operator Class
The system allows administrators to define operator classes
with up to 29 different privileges, and then assign each
operator to one of the defined classes. The privileges are:
permission override, area change, alarm select, all alarm
reset, alarm acknowledge and reset, all alarm arm and dis-
arm, alarm arm and disarm, alarm status (not currently sup-
ported), alarm history (not currently supported), digital out-
put port control, camera select, camera position, camera
preset programming, camera menu on and off, camera
function enable, camera receiver, camera setup data, cam-
era lock, camera lock override, tour sequence, group
sequence (not currently supported), group preset (not cur-
rently supported), all sequence stop (not currently support-
ed), sequence controller programming, video loss, monitor
select, monitor lock, on screen display on and off, time and
date on and off.
●
Operator Priority
The system administrator can assign a priority to each
operator. When two operators compete for system
resources, only the operator with the higher priority gets the
resources.
■
Video Switch and Video
Routing
This function allows operators to switch video from one
video source to another, if the permission is granted. For
multiple operators competing for the same resource, it only
allows the highest priority operator to perform this function.
The next highest priority operator gains control when the
highest priority operator releases the resource.
■
Video Camera Function
●
Camera Control
The system provides operators with the camera control
functions. The supported functions are: pan, tilt, zoom,
focus, and iris.
●
Camera Operation
The system provides operators with the following camera
operation functions:
• Camera menu control
• Camera preset call and programming
• Camera receiver control
■
Tour Sequences
●
Program the Tour Sequences
This function allows administrators to program tour
sequences, and store them in the system database.
The WJ-MPU955 can execute 20 tour sequence steps per
second. If the WJ-MPU955 is asked to perform more than
20 steps in a single second, it will automatically form 20-
step groups, and alternate their execution over a period of
two or more seconds.
●
Tour Sequence Operation
The tour sequence operation includes start, stop, pause,
run, next step, and previous step.