Panasonic WJMPU955 - PROCESSING UNIT - TMU, Руководство по эксплуатации

Страница: 35 / 62

35
Camera Function Control
■
Camera Setup
The following function requires the use of cameras
equipped with this specific feature.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Pressing the [F4] key while holding down the [SHIFT]
key will gain access to the Camera Setup Menu display
on the active monitor.
3. Select the desired item in the menu by moving the
Joystick Controller UP and DOWN , and then select the
desired parameter (or mode) in the menu by moving
the Joystick Controller
L and R .
Press the [CAMERA (ENTER)] key to execute the cur-
rently highlighted selection and to enter a submenu of
the Camera Setup Menu, or press the
[CLEAR (ESC)]
key to leave the currently selected menu and return to
the previous page of the menu.
4. Press the [RESET] key in the menu to reset the para-
meter of a selected item to the factory default setting or
enter the Special Camera Menu when the cursor is
positioned on SPECIAL in the menu.
Pressing the
[RESET] key while holding down the
[SHIFT] key will restore all factory default settings.
Notes:
• Refer to the Operating Instructions of the selected
camera for more details.
• Moving the joystick while holding down the [SHIFT]
key will move the camera smoothly for presetting
the position in the camera setup menu.
5. To close the Camera Setup Menu, press the [F3] key
while holding down the [SHIFT] key.
■
Changing to Black and White
Pictures
The following function is available only when specified cam-
eras having a color-black and white switching feature are
used.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Press the [F6] key two times.
"B/W Change" as shown in the figure will appear on the
LCD display of the controller.
3. Press the [1] key to change the picture from color to
black and white on the active monitor.
4. Press the [2] key to change black and white to color
picture on the active monitor.
5. To exit from the mode, press the [CLEAR (ESC)] key.
Note: When the black and white parameter is set
AUTO in the camera setup menu, this function is
disabled.
INFORMATION
Cam Menu On
ALARM ACK RESET
ALL
RESET
ARM
GROUP
PRESET
PREV
S-CTL ID OPE ID
NEXT
GROUP
SEQ
PAUSE STOP
TOUR
SEQ
R E V
RU N F W D
RU N
OSD
F.1 F.2 F.3
CMENU
OFF
F.4
CMENU
ON
F.5 F.6
CLOSE
IRIS
WIPER
OPEN
NEAR FA R
WIDE TELE
AUTO FOCUS
ZOOM
MONITOR
LOCK
OSD SERVICE
LOGOUT
AUX1 OFF AUX1 ON
CALL
PRESET
PGM
PRESET
C A M
P O S I
D I G I TA L
O U T
CAM ID
VLD S
T&D
ALM S
GEN
SYS S
(ALARM)
0
8 7
DEF OFF DEF ON
MSTATUS
VLD H
ALL
ALM H
BLK
5
9
6 4
2 3 1
SHIFT
CLEAR
(ESC)
EXIT
AREA
AUX2 OFF AUX2 ON
DEFAULT
FOCUS
VER
CAM
FUNC
CAMERA
(ENTER)
AUTO PAN
INFORMATION
B/W change
1:On
2:Off
ARM
F.1 F.2 F.3
CMENU
OFF
F.4
CMENU
ON
F.5 F.6
CLOSE
IRIS
WIPER
OPEN
NEAR FA R
WIDE TELE
AUTO FOCUS
ZOOM
LOGOUT
AUX1 OFF AUX1 ON
CALL
PRESET
PGM
PRESET
C A M
P O S I
D I G I TA L
O U T
CAM ID
VLD S
T&D
ALM S
GEN
SYS S
(ALARM)
0
8 7
DEF OFF DEF ON
MSTATUS
VLD H
ALL
ALM H
BLK
5
9
6 4
2 3 1
SHIFT
CLEAR
(ESC)
EXIT
AREA
AUX2 OFF AUX2 ON
DEFAULT
FOCUS
CAM
FUNC
CAMERA
(ENTER)
AUTO PAN