Panasonic WJHDE300 - DIGITAL DISK RECORDER, Инструкция по эксплуатации

Страница: 23 / 28

23
Setting/Changing hard disk mode after
resetting error
It is impossible to change or set up the hard disk mode
when the ERROR indicator and one of HDD access
indicators is lit red or is blinking. To set or change the
mode, repair the system so the indicators go out.
Refer to Troubleshooting of this manual and the operat-
ing instructions of the digital disk recorder for details.
Important:
• When an HDD indicator is lit or blinking red, the
HDD is faulty and should be replaced performing
the following steps.
• When less than three hard disks are mounted or the
mounted positions are wrong in RAID5, the HDD
indicators will blink red and be lit red. Add hard
disk(s) or correct the positions and then set up the
extension unit again.
• When the ERROR indicator is lit red and all HDD
access indicators are lit red and orange, it is a sys-
tem error. Consult your dealer.
1 SAFETY MODE ON
Select ON for HDD Safety Mode on the SETUP MENU
and press the SET button.
→
The recorder will restart and the HDD SAFETY
MODE window will be displayed.
2 Replacement of faulty HDD
• Confirm that the HDD POWER indicator on the front
panel of the extension unit has gone out.
• Replace the faulty hard disk referring to
■
Replacing/Mounting HDD.
• Go to the next step below after finishing the con-
nection of the front cover harness with the unit while
the switches and buttons remain operable (step 11
of
■
Replacing/Mounting HDD).
3 Initialization
1 Set the MODE switch to SINGLE.
2 While holding down the RECOVER button, press the
RESET button.
3 While holding down the RECOVER button, release
the RESET button about 1 second later.
4 Release the RECOVER button after the HDD
POWER indicator turns on.
SINGLE RAID5
MODE
RESET
HDD POWER
RECOVER
OFF ON
Press Release
Hold
Release
2
4
3
2
HDD
POWER
ERROR
OPERATE
SINGLE RAID5
MODE
HDD
POWER
HDD
POWER
SETUP MENU
Event Schedule
Display Comm Switcher
LIVE
Recording System
Maintenance
REC Rate
Disk Info
Version Info
Disk End Mode
Disk Capacity
Date Delete
Event Log
Error Log
Access Log
Quick Menu
MAIN
160GB 160GB
15000h 15000h
EXT1
160GB 160GB
15000h 15000h
EXT2
160GB 160GB
15000h 15000h
EXT3
160GB 160GB
15000h 15000h
EXT4
160GB 160GB
15000h 15000h
EXT5
160GB 160GB
15000h 15000h
EXT6
160GB 160GB
15000h 15000h
EXT7
■
Warning for Disk Life Time
■
HDD Safety Mode
160GB 160GB
15000h 15000h
160GB 160GB
15000h 15000h
160GB 160GB
15000h 15000h
160GB 160GB
15000h 15000h
160GB 160GB
15000h 15000h
160GB 160GB
15000h 15000h
160GB 160GB
15000h 15000h
160GB 160GB
15000h 15000h
Normal REC Area
Event REC Area
Copy Area
Copy 1 (Rear)
Copy
2
(Front)
30000h
ON
Remaining
1 2 3 4
1800GB
1200GB
1000GB
1000GB
1000GB
Advanced
SET