Panasonic WJHD309 - DIGITAL DISK RECORDER, Инструкции по эксплуатации сети

Страница: 70 / 72

• Aren’t you accessing the wrong IP address?
Check the connection as follows:
>ping "IP address of this unit"
If there is reply from this unit, the connection is
normal.
If not, check the settings of the IP address and the
subnet mask.
• Is the Ethernet cable connected to the
10/100BASE-T port firmly? Confirm the cable is
connected firmly.
Refer to the
Network Setup
Instructions on the
provided CD-ROM.
–
–
Refer to the
Network Setup
Instructions on the
provided CD-ROM.
Refer to the
Network Setup
Instructions on the
provided CD-ROM.
70
Reference
pages
Cause/solution
–
Troubleshooting
Before asking for repairs, check the symptoms with the following table.
Refer to the dealer if the respective solutions can not solve the problems or the symptom is not described in the fol-
lowing table.
Symptom
Can not access from the
browser.
• Is the connection indicator of the 10/100BASE-T
port lit? When it is not lit, connection to a LAN is
not established or a network is not working cor-
rectly. Confirm that the connection indicator of the
10/100BASE-T port is lit. Refer to a system admin-
istrator if it is not lit.
• Is the valid IP address set?
Refer to a system administrator for further informa-
tion.
• Isn’t the same IP address provided to other
devices?
Refer to a system administrator for further informa-
tion.
• Aren’t there contradictions between the address
and the network subnet to be accessed?
Or isn’t "Use Proxy Server" for the setting of the
browser checked?
When accessing this unit in the same subnet,
entering the address of this unit in the "Don’t Use
Proxy For These Addresses" box is recommend-
ed.