22
■
PPP Type Connection 2 (NETWORK ACCESS)
1. Windows NT Setup
q
When installed, Remote Access Service appears in the
list of Network Services.
In the
Network
dialog box, choose
Remote Access
Service
, and then click the
[Properties]
button to dis-
play the Remote Access Setup window.
w
Click the
[Configure]
button and configure the port in
the
Configure Port Usage
dialog box. Then click
[OK]
to return to the Remote Access Setup window of Step
q
.
e
Click the
[Network...]
button and set the protocols
used in the
Network Configuration
dialog box as fol-
lows:
r
Check
TCP/IP
in the
Dial out Protocols
field.
t
Check
TCP/IP
in the
Allow remote clients running
field.
y
Check
Allow any authentication including clear test
in the
Encryption settings
field.
If the
Dial-Up Networking
icon is not in
My Computer
, it is not installed. You can use the following procedure to install it.
(1) Right-click the
Network Neighborhood
icon on the desktop, and then click
Properties
in the pull-down menu.
(2) In
Network
dialog box, click the
Services
tab.
(3) If the Remote Access Service is not in the Network Services list, click the
[Add]
button to display the
Select Network
Service
dialog box.
(4) Choose
Remote Access Service
, and then click the
[OK]
button to display the
Windows NT Setup
dialog box.
(5) Click the
[Continue]
button in the dialog box to install Remote Access Service.
WJ-NT104
Modem/TA
CSU/DSU
Modem/TA
CSU/DSU
RS-232C
cable
Public lines
Dial-up server/
router etc.
LAN
RS-232C
cable
Camera (max. 4)
PC
(Windows95 etc.)
