63
You can also narrow your event search by selecting the “Option…”
and setting up the new search condition.
You can search video from the first to last recorded images, or
you can set the start and stop times and dates.
Highlight the box beside “From” and press the button to
toggle between On and Off. When set to Off, you can enter a
specific Date and Time. When set to On, the search will be
from the first recorded image.
Figure 105 : Motion Search Option screen
Highlight the box beside “To” and press the button to toggle between On and Off. When set to Off, you
can enter a specific Date and Time. When set to On, the search will be from the last recorded image.
Highlight the box beside “Type” and press the button. You can select between “Motion Search” and
“Museum Search”. “Motion Search” detects motion in the defined area. “Museum Search” detects if a
defined object has moved.
Highlight the box beside “Zone” and press the button. An image from the video appears with a grid
overlaid. You can turn sensor blocks On and Off to define the area of the picture in which you want to search
for motion.
Note: Defining the area of the image in which you want to search for motion is nearly identical to
setting up the recorder for “Motion Detection”. Please refer to “Motion Detection” in
“Chapter 3
--
Configuration” for more detailed instructions on setting up the detection
blocks.
When setting the “Museum Search Zone”, the zone should be placed inside of the border
line of the target object. If the selected block is placed on the border line, the sensitivity of
the “Museum Search” may decrease.
The zone should be placed or focused on the centre or, at least, within the outline of targeted object.
Highlight the box beside “Sensitivity” and press the button. You will be able to select from 1 (low
sensitivity) to 255 (high sensitivity).
Highlight the box beside “Min. Blocks” and press the button. You will be able to set the number of sensor
blocks that must be activated.
Once you set your desired search conditions, highlight “Search” and press the button to display the
search results in the Motion Search Option screen. Selecting “Cancel” exits the screen without saving the
changes.
When you search for motion events of another camera, you will be asked whether or not you want to delete
the previous search results from the list.
Clip Copy
Video clips can be copied on an external USB flash drive. The copied video clips can be viewed on
computers. Connect the USB flash drive to the Mouse / Copy Port of the recorder before starting following
operations.
Selecting A-B Clip Copy in the Search - Export menu or pressing the [COPY] button during the playback will
set the starting point of the video to be clip copied, and the icon displays at the bottom-left corner of the
screen. Selecting A-B Clip Copy in the Search - Export menu or pressing the [COPY] button again will set
the ending point of the video to be clip copied by displaying the Clip Copy screen.
Pressing and holding the [COPY] button for more than three seconds while in the Search mode or Live
Monitoring mode initiates the One-Touch Clip Copy function. The last recorded image will be the ending
point of video to be clip copied, and the system will automatically begin to calculate the possible video data
size that the selected storage media can handle.
Select Clip Copy in the Search - Export menu or press
the [COPY] button while in the Search mode or Live
Monitoring mode, and the “Clip Copy” screen appears to allow clip copy setup.
Содержание WJ-HL204/G
Страница 77: ...76 Map of Screens ...
