43
Alarm Center
A PC can be the alarm center of the whole monitoring system. The assignment of an IP address from the recorder to
a PC allows the PC to become the alarm center. When an event occurs on the recorder, event information will be
transmitted to the PC and an alarm is issued.
1. Alarm Center Configuration
Refer to page 40 of the operating instructions for the configuration of the alarm center.
Caution:
When using a PC on which Windows XP Service Pack2 (SP2) is installed, the "Security Warning" window with
the following message may be displayed when starting the NetClient software.
"To help protect your security, Windows Firewall has blocked some features of this program".
In this case, click the [Unblock] button. If the [Keep Blocking] button has been clicked inadvertently, perform the
following.
1. Open the "Control Panel".
2. Open the "Security Center".
→
Select "Windows Firewall".
→
Click the [Exception] tab.
→
Check if the check-
boxes relating to the program are checked or not. When the checkboxes are checked correctly, click the [OK]
button.
By performing the above solution, other applications and the security level may not be affected.
2. Starting of Alarm Center
Select "AlarmCenter" from "Program(P)" on the start menu. ("Start" - "Programs" - "Panasonic" - "WJ-HD88
Monitoring System" - "Alarm Center") The icon of the alarm center
will be added to the system task bar.
Left-click the icon
on the system task bar and select "Start" from the displayed submenu. The "Alarm Center" will
start.
