Panasonic WJ-HD616/1000, Руководство по установке

Страница: 140 / 156

140
About the error log
The following are the descriptions about the contents of the error log and the network log.
• "x" indicates the extension unit number.
• "y" indicates the HDD unit number.
Content Error log Network Log Display on
Monitor 2
Output from the
connector at
the rear panel
Outage detection POWER LOSS – POWER Error + Outage
processing end*
Recover from a power out-
age POWER RECOVERED – – –
Alteration detection ALTERED **CH – ALT–*
(*: camera ch) Error
No response from an
address of Panasonic
alarm protocol PANASONIC_ALM_RES_ERR – – –
Failed to resolve a address
of Panasonic alarm proto-
col from DNS PANASONIC_ALM_ADD_ERR – – –
Other error for an address
of Panasonic alarm proto-
col PANASONIC_ALM_OTHER_
ERR – – –
Parameter initialization
error – – – –
FAN warning Recorder: MAIN FANy ERROR
Extension unit: EXTx FANy
ERROR – FAN Error
Thermal error warning Recorder: MAIN THERMAL
ERROR
Extension unit: EXTx THERMAL
ERROR – THERMAL Error
Reboot by the system
error SYSTEM REBOOT – – –
HDD remove error (proper-
ly recognized HDD was
removed without opera-
tions on the front panel) Recorder: MAIN-y SWAP
WARNING
Extension unit: EXTx-y SWAP
WARNING – SWAP_ERR HDD error
HDD write error • Per HDD (In the single mode)
Recorder: MAIN-y WRITE
ERROR
Extension unit: EXTx-y WRITE
ERROR
• Per unit (in the RAID 5 or
RAID 6 mode)
Recorder: MAIN WRITE ERROR
Extension unit: EXTx WRITE
ERROR
– – –
HDD read error • Per HDD (In the single mode)
Recorder: MAIN-y READ
ERROR
Extension unit: EXTx-y READ
ERROR
• Per unit (in the RAID 5 or
RAID 6 mode)
Recorder: MAIN READ ERROR
Extension unit: EXTx READ
ERROR
– – –