PROGRAMMABLE DISPLAY WHA1 Advanced Model
18
The products have a system settings interface to allow configuration of system options.
The user interface of System Settings is based on HTML pages accessible from the HMI screen or
remotely using a Web browser Chrome v44 or higher using port 443.
To connect enter the address https://IP/machine_config where IP is the IP address of the HMI device.
Default username is “admin”, default password is “admin”. Use navigation menu on the left side of the
screen to browse through the available options.
The right side shows related information and settings. Depending on the size of the HMI screen, both
menu and content of selected item may be shown on screen at the same time or not.
System Settings has two modes of operation:
User Mode:
xAscender HMI R
untime is running or the HMI device is in “factory default” status.
System Mode:
xAscender HMI Runtime is not running or the HMI device has a software failure.
System Mode includes all options available in User Mode and additionally includes
commands dedicated to system upgrade and recovery not available when running in
User Mode.
Activation of System Settings in User Mode:
xAscender HMI Runtime not running:
Press “System Setting” button on the HMI screen
xAscender HMI Runtime running:
Recall context menu and select “System Settings”. To
recall the context menu click and hold any unused area of
the touchscreen for a few seconds. Default hold time is 2
seconds.
