Panasonic WHA1 Series, Руководство пользователя

Страница: 19 / 28

PROGRAMMABLE DISPLAY WHA1 Advanced Model
12
■ Ethernet Port
Item
Specifications
AWHA1C050 AWHA1C070 AWHA1C101 AWHA1C156 AWHA1C215
Port number 2CH 3CH
Interface 100BASE-TX / 10BASET
Baud rate (Note 1) 100Mbps / 10Mbps
Connecter shape RJ-45 (Note 2)
Cable total length 100m (500m when using a repeater) (Note3)
Communication cable UTP cable (Category 5)
Number of simultaneous
connections
Max. 4
communication method Full-duplex/Half-duplex
communication protocol TCP/IP, UDP
DNS Name server support
DHCP Correspondence of automatic IP address acquisition
FTP server / client
Server function: Transfer file
Client function: Transfer data and file
HTTP server / client
Server function: customer web
Client function: Web browser
SNTP Correspondence of Time setting function
Protocol Refer to xAscender Studio User's Manual (Communication).
■ USB Port
Item
Specifications
AWHA1C050 AWHA1C070 AWHA1C101 AWHA1C156 AWHA1C215
Port number 1CH 2CH
Communication standard High-Speed USB 2.0 (Host Controller )
Connector shape USB Type A
Transmission speed 480Mbps (High Speed)
Maximum current Max. 500mA
(Note 1) Take care of handling of the connector not to add an excessive static electricity
on the metal part of the connector.
(Note 2) The format of the external memory should be in FAT32 or FAT.
The max number of files inside external memory depends on the type of formatting.
・
FAT32 max 65535 files
・
FAT max 512 files
(Note 3) Do not remove the USB memory while the power is on.*
*Communication may be stopped. It is necessary to restart the power supply to recover.
(Note 1) Switching between different speeds is done automatically by auto negotiation
function.
(Note 2) Be careful not to apply excessive static electricity to the metal parts of the connector.
(Note 3) The maximum length of the cable is 100m in accordance with the standards, but
depending on the operating environment, a ferrite core may be installed to reduce noise. May
be required. It is also recommended that the hub be installed near the control panel and that it
be used at 10 meters or less.